News

If you are interested in a DIY soldering iron sleep stand, you might want to check out this article.

If you have a C210 soldering station but still need a sleep stand, you can come up with the idea of making one yourself.

Luckily, if you have a stainless steel reducing hose connector, you can start making your own DIY sleep stand.

A small piece of angle iron.

Then, you can start drilling holes. Make the hole slightly smaller, place the reducing connector directly onto it, and hit it hard with a large hammer about 20 times. After combining the two parts together, the connection will be quite stable, saving you the need for an additional nut.

Finally, screw a nut inside, connect it to the soldering station’s sleep cable, and the project is complete. The fit is tight and precise, and the whole process is surprisingly simple.